| Cost saving |
- The integrated one line system composed of three stages of coating,
heat dry, and UV function is provided for mass-production of even quality
products at a speed of 7m per minute only by setting once coating requirements.
- Individual air control functions save coating material.
- A special reflecting plate in the dry furnace is applied for the utmost
heat source of distant infrared ray heater. Light and fuel expenses can
be saved.
- No need of maintenance by employing booths with no pump.
|
| Incomparable
quality improvement |
- Quality based on the same conditions is produced by constant automatic
coating system.
- Stable film finishing is carried usually into effect by function to
follow, pass, return quickly according to the transfer of work spray gun.
- As temperature in drying furnace and drying time according to work
materials and different coating materials can be set, adhesive property
of film improves.
- By the function of elastic collision equipment mounted on conveyor
chain, the transfer of work and the film thickness are uniform.
|
| No pollution
in a new age |
- The mist of over-sprayed coating material can be changed to the different
direction by high speed air current in a booth with no pump and flown into
a water tank. High efficiency of the mist removal.
- Make-up water in a booth water tank is just enough to supply vaporized
water, so that there is no pollution problem of liquid waste. The collected
mist precipitates in the state of sludge which is not adhesive. So, there
is no septic action of water even if used for long hours.
- Even UV coating material is allowed to collect mist completely by the
mist treatment equipment incorporated in the exhauster in booth.
|
