RESINTECH ® HDPE DOUBLE-WALL CORRUGATED SEWER PIPE

Approved by Jabatan Perkhidmatan Pembetungan Kementerian Perumahan dan Kerajaan Tempatan

The Sewer Pipe System of the Future Your Substitute For Vetrified Clay Pipe

• Cost Effective (Competitive Pricing and Low Installation Cost)
• Manhole to Manhole (Available in 4M, 6M, 9M OR 12M)
• Leakage Proof (Double-Wall Construction)
• Superior Physical Properties (Strong and Non-Breakable)
• Superior Chemical Resistance (Corrosive Chemicals in Wastewaters)
• Easy handling and Installation (Lightweight Design and Easy Installation)
• Wide Service Temperature Range (from -40°C to 80°C)
• Superior Abrasion Resistance (High Durability and Long-Service Life)
• Superior Hydraulic Flow Capacity (Smooth Inner Surface Provides Reduced Friction)
• Environmentally Friendly (Provides 60% Material Savings as Compared to Conventional Pipe Designs and is Recyclable)

The RESINTECH® Sewer Pipe System Has Many Benefits
Advantages That Speak For Themselves

RESINTECH, HDPE Sewer Pipe is a composite HPDE pipe with a smooth-surfaced inner wall (coloured yellow) surrounded by a profiled outer wall (coloured black). The corrugated outer wall provides optimum strength under compressive loading from covering layers and traffic. The smooth inner pipe ensures excellent hydraulic flow capacity. The bright yellow colour of the inner pipe also improves visibility in TV inspection, providing optimum, conditions for acceptance testing.

RESINTECH HDPE Sewer Pipe is available in nominal diameters DN 200, DN 250, DN300, DN350, DN400 and DN450.

RESINTECH HDPE Sewer Pipe fulfills the strict requirements of DIN 16961. It is supplied in sections 6m/12m long with a HDPE socket and a profiled EPDM sealing ring mounted on one and in accordance with DIN 4060 and Approval Document PA 1-4084 from the German Institute of Construction Technology (DIFBt/Berlin).

The composite design provides high long-term ring stiffness, i.e. greater than 10 kN/mm². This ensures high load-bearing capacity regardless of the type and quality of installation.

Besides stiffness, another decisive factor for a pipe system is a secure jointing technology. This is provided by the push-fit socket/sealing ring system.

The corrugated outer surface of Resintech HDPE Sewer Pipe allows secure and consistent placements of the mushroom-profile sealing ring.

A full range of accessories and fittings is offered with the Resintech HDPE Sewer Pipe system.

The special geometry of the socket compression zone provides a tight joint with a pull-out strength of at least 50N. The limit stop in the joint acts as a stop barrier and prevents overinsertion. The sealing ring is placed in the second corrugation groove from the pipe end. Lubricant is applied to the mating surfaces prior to joining. 

• Secure Jointing Technology
  with push-fit socket / sealing ring
• Superior Chemical Resistance
  to corrosive chemicals in wastewater
• Excellent Physical Properties
  and thus increased security and non-breakable
• Superior Hydraulic Flow Capacity
  smooth inner surface provides reduced friction
• Excellent Abrasion Resistance
  for high durability, long service life
• Easy handling
  due to lightweight design and fast processing
• Wide Service Temperature Range
  from -40 0C to +80 0C
• Environmentally Friendly
  provides 60% material savings as compared to conventional pipe designs and is recyclable